Sand washer is widely used in construction sites, gravel plants,
hydropower concrete dam site and other industries. Sand washer is
featured with high cleaness, reasonable structure, large processing
capacity, low power consumption and the less sand is washed away in the
working process of sand washing equipment.
In addition, the transmission parts of the sand washer are isolated
from the water and sand, which makes the failure rate much lower than
that of the commonly used sand washer. It is the best choice for the
upgrade of the domestic sand washer in the industry.
1, it is necessary to frequently check the oil level of the reducer,
the tightness of the V-belt and the degree of engagement and
lubrication of the gear, find out whether the connected fasteners are
loose or not. All of these are made to ensure that the machine is in a
normal and stable working condition. At the same time, adequate
lubrication of the friction parts is necessary and the periodic
lubrication is also indispensable.
2, after the reducer has been in
operation for a month under the premise of that it is lubricated for
the first time, it is necessary to timely replace the lubricant. When
filling the lubricants, the operator should filter the lubricants. In
the south, the selection of the lubricants model should be higher in
the terms of viscosity of the lubricant than that in the North.
3,
when the sand washing equipment is in operation, there should be a
dedicated technical staff person in charge and the operator must possess
the necessary skills. Before the installation of the sand washing machine,
it is necessary to conduct technical operations training for the staff
so that they can understand the principle and performance of sand
washing machine and be familiar with the operating procedures.
4, it is necessary to be equipped with the necessary repair tools as well as lubricants and accessories.
No comments:
Post a Comment